The actual structure of this packaging container would be the combination with stage, line, surface, body. For folding cartons, glued trays and also corrugated boxes, the angle is an essential structural elements aside from the elements mentioned previously.
(1) Point
You'll find 3 types of structural point on the basic carton packaging structural: the particular multi-faceted point of intersection, 2 sides intersection point and points from the plane.
(2)Series
The crease line of the paper the labels can be divided into two categories based on the adaptation of automatic machinery production: before-folding line and working line.
(3) Surface area
For the reasons of flat sheet forming the dish (box) surface can only be flat as well as curved surfaces.
(5) Body
From the way of paper packaging modeling, the basic model of the structure could be divided into the following three categories:
① Spinning molding Through turning from the flat to three-dimensional shape, tube, tray, tube tray carton belongs to these kinds of carton.
② Shift modeling Through shifting both the parts of the actual carton body for just a certain distance by two-dimensional to a few-dimensional molding, not for-tube non- holder belongs to this type of carton.
③ Straight-inverse modeling Forming done straight-reverse the entire body of the paper packaging partitions, back again cover, fixed anatomical structure.
(5) Angle
It's the key of report packaging rotate custom modeling rendering by point, brand, surface and additional factors compares to other kind of product packaging materials.
2. carton packaging molding
You can find 3 kinds involving carton packaging molding methods: rotating, switching, straight and reverse modeling. Each of them has their personal advantages.
3*3 principles in carton packaging design
1. Three principles with the structural design
(1) folding cartons connector should be related in the better half of the board, in exceptional situations it can link to the stop plate can follow bonded with the trunk panel. Unless a final resort, generally usually do not connect the the front plate or conclude plate bonded while using the front panel.
(2) The carton cover should be attached to the rear panel (besides adhesive sealing protect and window stylus cover plate).
(3) The end panel should in general be connected to the front panel. So, when consumers encounter carton packaging, is not observed due to be able to joints caused by the appearance of defects or from back to front to open the particular lid and carry inconvenience to consider the contents.
2. Three principles with the overall design
(1) the overall pattern should meet the habit of smoking consumers decide to buy the first declaration of the carton packaging design surface area (ie, including the key pattern, trademark, brand name, manufacturer name, as well as sign the prize-winning exhibition surface); or to meet the distributors' habit to help window display, shelf display and other promotional activities so that it gives consumer the strongest visual influence face to deal with.
(2) the entire design should satisfy the habit of people in the paying attention or get the actual contents from side-to-side to open the actual lid.
(3) the design should satisfy the habits of most consumers with the suitable hand to open the lid.
3. Several principles of this graphic design
(just one) The main graphic design of carton promotion should be designed in the tray entrance panel (tube box) or on the top's (tray box), textual content and secondary pattern design after the tip plate or panel.
(2) When the particular carton packaging ought to be displayed vertically, the particular graphic design of the surface should consider the position from your cover plate to bottom plate.
(3) When the carton packaging need to be displayed horizontally, the actual graphic design on the surface should consider the habits of customers with the right to open the particular packaging, the entire graphic design from the upper left right end, the candid position at the suitable end.
