Corrugated box quality control

Rational design corrugated cardboard

As the details of the corrugated box design refers to the cost of product packaging, and data protection is a function of the product into three categories depending on the size of a large box consolidated less than 2000 mm less than 2000 mm can be divided, but more than 1000 mm of the mean field are less than 1000 mm in a small box. If the structure of corrugated board is too large, it is not only caused by the waste during transport or processing of the product can result in property damage. On the contrary, if the field is too small, then the product is not intended, and do not overtighten to break the box is slightly damaged, do not get the best protection. It also takes into account a lot of difficulties in the management of the finished product, when the specification is too large, the weight of the load will cause. Instead, the weight is too small, it is established, it will prove packaging and processing efficiency.

The relationship between the structure of corrugated cardboard and compressive strength

The most important feature of the corrugated cardboard is a good protection of goods during the entire compression force carton for the embodiment of the importance of protecting cardboard compressive strength is obvious. Analysis of the data showed that the compressive strength and the peripheral edge of the height and width of the length of a special relationship. On the perimeter more, more resistance to compression, the box size and the degree of resistance to compression of the conversion ratio. corrugated design affects the structural strength.

Specification Quality Management

Following the development of standards approved corrugated cardboard, it is expected to meet the standards of production to the needs of users, but also in daily production, there are deviations from the light a certain situation affect the normal use and protection. Caused heavy scrap cardboard, lot size at the same time, it is too small to store food or just collected only in the destruction of the windows, the design and production of cardboard. exhaustive consider some factors affecting the quality control, the thickness of corrugated box, bulimia, tongue lapping, moisture content, punching and bending line of climate change. These factors should be taken into account all the specific quality control has wavy.

The number of items rated resistance

Resistance corrugated direct impact on the product packaging and protective, the engine will affect the performance depends mainly on the basis of the base paper box capable quantitative composition flute features thick cardboard and humidity content.To force improvement wavy, you must first select the category of quality and quantum of paper basis, however, the rational design of the structure of a cardboard box. Third according to the manufacturer. wise, the waves ripple corrugated, thickness and number of layers, the fourth is reasonable to focus on the production of corrugated cardboard force generation is the use of waste from die-cast aluminum teeth during production. Fifth keep a clear fold lines.

Thus, the wave surface design and corrugated box quality control in all aspects, as we understand it, and understand the factors that affect the strength of the board. Reasonable control of the manufacturing process in accordance with the characteristics of the product packaging science, focusing on quality control of origin the entire production process, from designing rigorous inspection technology and management, to reduce not only effective or prevent various quality options theme, but it is better to talk about the effectiveness of production and processing of high-quality products to meet the needs of users.